As of September 16, MaXpeedingRods August activity，”Show and Tell Us About Your Car Building“，end in a satisfactory way.
Then there’s the big prize time. The four awards include:
1. First Prize: ＄300 coupon
2. Second Prize: Custom-made T-shirt & Hat
3. Third Prize: Car Model or Cute Doll
4. Participation Award: $20 Coupon
Who is the lucky winner?
According to the number of Likes that each participant gets from MaXpeedingRods blog, the winners of this activity are announced as follows:
First Prize Winner: Valentin Pettersson with 152 likes
Hi. Me and my wife Ewelina Marjatta will rebuild our car.
This is our Nissan 200SX S13 1990. We have now start to demolish and completely rebuilt.
In the beginning, we bought a second CA18DET engine that we wanted to forge the hole engine, but we got another deal on a 2JZ engine and it was no doubt that that one was better to build on.
Second Prize Winner: Abdiel Gondola with125 Likes
Hi, this is my project a BMW e46 318i 2001 swap to m52tu stroke to 3.0 Gt35 from MaXpeedingRods, S52 clutch kit stage 4, Cometic head gasket, 6 bosch injectors 42lbs, Custom pandem kit and ESR rims.
Second prize winner: Andrew Thompson with 78 Likes
1987 1000cc mini turbo.
3 piece rims.
Fully built engine steel flywheel, s/c c/r gearbox 4 pin diff.
Giving the little car a bit of a rebuild new ko3 billet turbo side mount manifold and 2.5 inch exhaust should help boost power.
Third prize winner: Jordan Bishop with 35 Likes
Here is my 1999 Honda Civic EK4.
When I First got the car, i straight away made up a turbo kit for it using a MaXpeedingRods T04E turbo on a complete stock engine. It made 274bhp, after year I decide to build a forged engine, using MaXpeedingRods H-beam conrods with CP Pistons, supertech valve springs and retainers, ported head with lots more other bits then going bigger with the turbo using MaXpeedingRods GT30.
The car makes over 400bhp weighing 1000kg at the same time. I painted all the engine bay and parts. The car has also got all the usual modifications, custom exhaust, coilovers etc.
Third prize winner: Simão Barros with 22 Likes
2009 Toyota iQ 1.4 D4D 90cv.
A cool micro machine with 17 rims.For now.
Third prize winner: Quint Gardiner with 19 Likes
Quint Gardiner:
MaXpeedingRods H-beam Rods 800Hp.
Forged pistons.
Supertech 93lb valve train springs Cometic head gasket.
Clutch Master 9lb flywheel.
Quater Masters 7.25″ twin disk clutch.
Gates timing belt.
GT3582R 1.06 Turbo.
2 x bosch 044 fuel pumps.
4 x bosch 1600cc injectors.
Polished ports / head.
Note: To thank all participants for their positive interactions，participants who do not win will also receive a $20 coupon（order over $300） that can be used for all products except specials on MaXpeedingRods.com，please contact the staff to get the coupon.
