How To Assemble Rods on a Peugeot EW10J4 Engine?

Editor's Note: This manual is shared by Pellizzoni, a friend of MaXpeedingRods. The instruction is restricted to the assembly of MaXpeedingRods connecting...

Volvo Rods Unboxing And Initial Thoughts

Editor’s note: In today’s review article, our friends Kenny Howard will take you through the accurate and thorough review on MaXpeedingRods Volvo Rods....

How to Notch Your Block to Support Forged Rods

Editor's Note: In today's video, our friend and partner James Moore(Youtube: Texas Honda Channel) is going to show you how to notch...

H-Beam vs. I-Beam Connecting Rods

Editor's note: We had talked a little about H-beam and I-beam connecting rods in article how to choose the right connecting rods? In today's...

Toyota 4AGE Conrods Balance Test and Review

Editor's note: Are MaXpeedingRods connecting rods balanced as we claim? In this article, Emir Kurtovic(Channel: driving 4 answers) test this out and weigh MaXpeedingRods...

Causes of Failure With a Connecting Rod

The break problem of a connecting rod is often caused by high heat.

Alex’s Golf MK2 1.8t, 500+ HP

Editor’s note: The auther of this article, Alexander Richrath, from Düsseldorf, Germany. Today he shares his 1990 Golf MK2 Turbo build which was installed...

Donnie Davis First Stepped Into MaXpeedingRods Golf H-Beam Conrods

Editor’s note: Donnie Davis ordered MaXpeedingRods H-beam connecting rods for his VR6 engine the first time. One month later when receiving it, he was thoroughly...

7 Years Ago, Hap Waldrop Ran A Torture Test Of Our...

Author's note: Here is first thread i ever wrote about the MaXpeedingRods as we sorted them out, it was almost 7 years ago now....

2JZ Supra Engine Rebuild with 4340 EN24 H-Beam Conrods

Editor’s note:When Valentin Pettersson put MaXpeedingRods H-beam Conrods on his 2JZ Supra engine, what did he said. We are in the process of rebuilding our...